DGST6#
Product Description
Features
Removes cleanly and in one-piece from most surfaces, avoiding slivering and breaking.
Ability to withstand punishing abrasion of sand blasting and the plasma spray process.
Removes cleanly and easily in one-piece after process
Application
DGST6# is is used in the sand blasting and plasma spray process.
Technical data
Backing Material | Silicone Rubber/Glass cloth | |||
Adhesive Type | Silicone | |||
Color | White | |||
Total Thickness | 300µm | 12mil | ||
Adhsion to steel | Open side>4 | N/inch | Liner side>9 | N/inch |
Elongation at break | 5 | % | ||
Temperature resistance (30 min) remove without residue | 268 °C |
Storage | Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% relative humidity in the original packaging material. |
Shelf life | To obtain best performance, use this product within 12 months from date of manufacture. |
Sizes | In 480mm log roll and cutting roll in variable width |